Коммутатор IBS-102FX, Киев

IBS-102FX

Промышленный 2-портовый оптический bypass коммутатор для оптоволоконной сети с 4xLC дуплексным разъемом

IBS-102FX series are the external Bypass switches for 100M/1G/10G fiber optical networks. These fiber optical bypass switches protect the network from failures and subsequent maintenance by ensuring network integrity during power loss. Each of these fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operation mode of the Bypass switch is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass switch is swiftly set to bypass mode to isolate the main-network from the local networking device.

Возможности

Support 100M/1G/10G optical bypass function of 2 port duplex or 4 ͑port simplex fiber connection

Different models supported for multi-mode or single-mode optical ͑fiber

Low insertions loss ͑

Throughput not affected and no extra delay

Bypass switching time < 10ms

Dual wide-range power inputs: 12~48VD

Relay output for power failure warning

Rigid IP-30 housing design

DIN-Rail/Wall-mount installation

Спецификация

ORing Bypass Switch Model
IBS-102FX-SS-LC
IBS-102FX-MM-LC
Порты
LC connector
4 Duplex Single-mode LC connector
4 Duplex Multi-mode LC connector
Fiber Ethernet
Optical Fiber
Single-mode: 9/125μm
Multi-mode: 50/125μm or 62.5/125μm
Operating Wavelength
1260 ~ 1570 nm
780 ~ 1350 nm
Insert loss
typical1.2 dB , Maximun 1.6 dB
< 1.0 dB
Switch time
< 10ms
< 10ms
DIP Switch Settings
DIP Swicth No.1
Power-1 failed warning detection - (On) relay enable (Off) relay disable
DIP Swicth No.2
Power-2 failed warning detection - (On) relay enable (Off) relay disabl
LED индикаторы
Power Indicator
Green : Power LED x 2
Normal indicator
Green On : Operated in normal mode
Fault indicator
Amber : Indicates power failure occurred
Датчик неисправности
Relay
Relay output for power failure warning
Питание
Redundant Input Power
Dual 12~48 VDC power inputs at DC-Jack and 4-pin terminal block
Power Consumption (Typ.)
2.7 watts
2.7 watts
Overload Current Protection
Present
Reverse Polarity Protection
Present on terminal block
Физические характеристики
Enclosure
IP-30
Dimensions (W x D x H)
26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch.)
Weight (g)
405 g
405 g
Окружающая среда
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-40 to 70°C (-40 to 158°F)
Operating Humidity
5% to 95% Non-condensing
Соответствие стандартам
EMI
FCC Part 15, CISPR (EN55022) class A,
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950-1
Warranty
5 years

Характеристики коммутатора IBS-102FX

• — Страна производитель: Тайвань
• — Бренд: ORing