Медиа конвертер IMC-P111FX, Киев

IMC-P111FX

Промышленный IEC 61850-3 Ethernet - оптика медиа конвертер с 1x10/100Base-T(X) в 1x100Base-FX / 1x100Base-FX SFP порт

IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111 series supports MDI/MDIX auto detection, so you don't need to use crossover wires. IMC-P111 series with wide operating temperature range from -40 ~ 85oC and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments. IMC-P111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IMC-P111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application.

Спецификация

Модель медиаконвертера ORing

IMC-P111FX-MM

IMC-P111FX-SS

Порты
Port type
100Based-FX Multi-mode Port
100Based-FX Single-mode Port
Fiber Ports Number
1
1
Fiber Diameter (µm)
62.5/125 µm
50/125 µm
9/125 µm
Fiber Optical Connector
SC
SC
Typical Distance (Km)
2 Km
30 Km
Wavelength (nm)
1310 nm
1310 nm
Max. Output Optical Power (dbm)
-14 dbm
-8 dbm
Min. Output Optical Power (dbm)
-23.5 dbm
-15 dbm
Max. Input Optical Power (Saturation)
0 dbm
0 dbm
Min. Input Optical Power (Sensitivity)
-31 dbm
-34 dbm
Link Budget (db)
7.5 db
19 db
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-T(X) and 100Base-FX
IEEE 802.3x for Flow control
Processing
Store-and-Forward
DIP-Switch setting
DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
LED индикаторы
Power indicator
Green : Power LED x 3 (ON : power input on-line / (OFF) power input off-line
10/100Base-T(X) RJ45 port indicator
Green for port Link/Act - (ON) Link up / (Blinking) Acting / (OFF) Link down
Amber for 100Mbps/10Mbps indicator - (ON) Working at 100Mbps / (OFF) Working at 10Mbps
Green for port duplex indicator - (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator
Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
Green for fiber port duplex indicator - (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator
Amber LED - (ON) LFP function fail / (OFF) LFP function disablem
Fault Indicator
Amber : Indicate unexpected event occurred
Питание
Input power
Triple DC inputs. 12~48VDC on 7-pin terminal block. 12~45VDC on power jack
Power consumption (Typ.)
TBD
Overload current protection
Present
Reverse polarity protection
Present on terminal block
Физические характеристики
Enclosure
IP-30
Dimension (W x D x H)
52 (W) x 106.1 (D) x 144.3 (H)mm (2.05 x 4.18 x 5.68 inch)
Weight (g)
TBD
Окружающая среда
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-40 to 85°C (-40 to 185°F)
Operating Humidity
5% to 95% Non-condensing
Соответствие стандартам
Power Automation
IEC 61850-3, IEEE 1613
EMI
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN50121-4
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Warranty
5 years

Характеристики медиа конвертер IMC-P111FX

• — Страна производитель: Тайвань
• — Бренд: ORing